Peroxide can be used to fight unwanted algae. In our opinion, this option is not very effective. Since it is always necessary to look for and level out the cause of an algae outbreak, it is the best and most correct tactic. Nevertheless, if you want to fight the visual effects, you can apply peroxide, which will burn the algae. Again, hydrogen peroxide is ineffective against specific types of fouling. It can fight green filamentous algae and not all of them. Therefore, it is possible to enhance the action of peroxide and make some home options

Can you put vinegar in a fountain?

If there are signs of hard water buildup inside the pump, try adding plain white vinegar to the pump cavity and let it soak for 10-15 minutes. Let the impeller soak in a separate container of vinegar for the same amount of time. Vinegar has antibacterial, antiviral, and antiseptic properties, killing germs on contact.

Can baking soda get rid of algae?

A mixture of baking soda and water is used as a spot treatment to kill algae as well as moss. However, this treatment is temporary, and algae will return if the cause of the growth is not eliminated. Baking soda is moderately abrasive, so it is ideal for removing residual mildew and mold. It works especially well in those hard-to-reach areas. Make a paste of baking soda water and simply apply it to the surface with a brush or sponge. Bicarbonate, the active ingredient in baking soda, is an effective spotting agent to help kill what is algae and get it off the wall.

Can I use white vinegar in my fountain?

The quality of the water can also affect the pump and its operation. Hard water will cause calcium deposits in the pump cavity, blocking the rotation of the impeller. If there are signs of hard water buildup inside the pump, try adding plain white vinegar to the pump cavity and let it soak for 10-15 minutes. Allow the impeller to soak in a separate container of vinegar for the same amount of time. Wash all fountain parts with soap and water before reassembling the fountain.

Can I use chlorine tablets in my fountain?

Even the most crystal-clear water in the pool, due to the rapid evolution of microorganisms, quickly becomes turbid, greenish hue, and even smelly and unpleasant. Owners do not dream about it, but they want the water to be clear all summer, so they are looking for ways to clean the pool at home. For many years, for disinfection chlorine is used- an effective and inexpensive means. It contains special molecules, and its task is to eliminate microorganisms already present in the water that lead to the growth of algae, bacteria, and infections. If you follow the instructions and the dosage during the cleaning process, the product will not harm.

Can I put baking soda in my fountain?

It is desirable that the cleaning of the fountain was carried out with the use of professional means. But if the clog must be removed urgently, and there are no suitable tools, it is allowed to use improvised means, including baking soda. At the same time, there is no guarantee that you will achieve the desired result. The idea may fail because the contamination will be too difficult. Therefore, it is desirable to combine chemical cleaning with mechanical, that is, in addition to the solution and hot water, use a plunger or plumbing rope.